Computerised Pelton Wheel Turbine Test Rigs (3.75 K watt)
(Closed Circuit system)

We are Manufacturer, Supplier, Exporter of Computerised Pelton Wheel Turbine Test Rigs & our setup is situated in Sangli, Maharashtra, India.

Pelton Turbine designed for laboratory experimental purpose & to conduct test under constant head of the following specifications.

Net Head : 45 M.
Discharge : 630 LPM
Normal Speed : 1000 RPM.
Power : 3.75 Kw (5 HP)
Runner Diameter : 250 mm.
Number of Buckets : 18.
Brake Drum Dia: 300 mm.

The unit consists of the following :

Casing : Of close grained cast iron with large circular observation window.

Runner : Of gun metal fitted with ground & accurately finished buckets.

Shaft : Of steel ground to close tolerance.

Spear Road : Of gun metal fitted with a brass opening & iron wheel for adjustment.

Inlet Pipe : Of close grained C.I. arranged so that the inlet can be either vertical or horizontal.
Brake Arrangement : AC Alternator

Centrifugal pump set suitable for the supply of water for the size of 2 ½ “ (65 mm) to discharge 630 LPM at a total head of 45 m. coupled to 15 HP,
1440/2880 RPM induction motor 3 phase 400/440 V. AC. supply

Flow Transmitter : 1 No

Pressure Transmitter : 0 to 10 bar , 1 no

Vacuum Transmitter : 0 to 760 mm hg , 1 no

RPM Transmitter : 0 to 3000 rpm

Computer : Dual Core, 500 GB Hard Disk With included 2 GB RAM. Keyboard & LCD Monitor.

Control Software : A powerful control software for study & investigation of characteristics of Turbine i.e speed Vs discharge, speed Vs efficiency, speed Vs Power etc.

M.S. reservoir with drain valve of ½ ” size & a bend.

Starter, Switch

Strong iron stand to support the unit.

Instruction manual 1 copy.

Computerised Francis Turbine Test Rig (3.75 Kwatt)
(Closed Circuit system)

Francis Turbine designed for laboratory experimental purpose & to conduct test under constant head of the following specifications.

Net Head : 16 m.
Discharge : 2000 LPM.
Normal Speed : 1250 RPM.
Power : 3.75 Kw (5 HP)
Runner Diameter : 100 mm.
Number of Vanes : 8.
Brake Drum Dia. : 300 mm.

Casing : Spiral shaped & made of close grained cast iron.

Guide Vane Assembly : The vanes are operated by hand wheel through a screws
& nut mechanism a guide ring & a system of links & levers.

Runner : Of gun metal designed for efficient operation accurately machined & smoothly finished & securely keyed to the shaft.

Ball Bearing : With single row angular contact type provided in the casing to take up the axial thrust & a couple row self aligning radial type provided in the outer pedestal.

Draft Bend : Provided at the exit with a cylindrical transparent window fitted downstream of the runner for observation of flow & a conical draft tube of M.S. fabrication.

Brake Arrangement : AC ALTERNATOR

Centrifugal pump set suitable for the supply of water for the size of 4” x 4” to discharge 2000 LPM at a total head of 16 m. coupled to 15 HP, 1440/2880 RPM induction motor 3 phase 400/440 V. AC. supply

Flow Transmitter : 1 No

Pressure Transmitter : 0 to 10 bar , 1 no

Vacuum Transmitter : 0 to 760 mm hg , 1 no

RPM Transmitter : 0 to 3000 rpm

Computer : Dual Core, 500 GB Hard Disk With included 2 GB RAM. Keyboard & LCD Monitor.

Control Software : A powerful control software for study & investigation of characteristics of Turbine i.e speed Vs discharge, speed Vs efficiency, speed Vs Power etc.

M.S. reservoir with drain valve of ½ ” size & a bend.

Starter, Switch

Strong iron stand to support the unit.

Instruction manual 1 copy.

COMPUTERISEDKAPLAN TURBINE TEST RIG (3.75 K watt)
(Closed circuit system)

Kaplan Turbine designed for laboratory experimental purpose & to conduct test under constant head of the following specifications.

Net Head : 5 m.
Discharge : 6000 LPM.
Normal Speed : 1500 RPM.
Power : 3.75 Kw (5 HP)
Runner Diameter : 200 mm.
Number of Vanes : 8.
Brake Drum Dia. : 300 mm.

Spiral Casing : Of close grained cast iron, with 250 mm flanged inlet.

Guide Vane Assembly : Stainless steel guide Vanes coast integral with their spindles with external link mechanism, which can be operated by means of a hand wheel.

Runner : Of gun metal with polished adjustable aerofoil blades for efficient operations. The blades can be adjustable by means of a suitable area link mechanism housed inside the runner hub, operating through the hollow steel shaft.

Brake Arrangement : AC ALTERNATOR

Mixed flow pump with volute casing suitable for the supply of water for the Turbine size of 10” x 10” to discharge 6000 LPM at a total head of 8 m. coupled to 20 HP induction motor 3 phase 400/440 V. AC. supply

Flow Transmitter : 1 No

Pressure Transmitter : 0 to 10 bar, 1 no

Vacuum Transmitter : 0 to 760 mm hg, 1 no

RPM Transmitter : 0 to 3000 rpm

Computer : Dual Core, 500 GB Hard Disk With included 2 GB RAM. Keyboard & LCD Monitor.

Control Software : A powerful control software for study & investigation of characteristics of Turbine i.e speed Vs discharge, speed Vs efficiency, speed Vs Power etc.

M.S. reservoir with drain valve of ½ ” size & a bend.

Starter, Switch

Strong iron stand to support the unit.

Instruction manual 1 copy.

TERMINAL VELOCITY APPARATUS TO A SPHERICAL BODY IN WATER
Spherical body of 25mm size steel MS reservoir .4X.35X8m drain valve 1/2” MS collecting tank 0.5X0.35X.35m 1” drain .6m hight differential manometer

PUMPS IN SERIES

The unit is consist of :

Two pumps of size 2” x 2” in series coupled to 5 H.P. motor each.

Pressure gauge with psyphen & cock : 2 Nos.

Vaccum Gauge : 2 Nos.

Foot valve : 1 No.

Energy meter : 2 Nos.

Switch & Starter : 2 sets.

Stop Watch : 1 No.

Measuring tank : 450 x 450 x 750 size with scale fitting & 2” drain valve.

Speed Sensor with indicators : 2 sets.

Instruction Mannual : 1 Copy.

B. PUMPS IN PARALLEL
The unit is consist of :

Two pumps of size 2” x 2” in Parallel coupled to 5 H.P. motor each.

Pressure gauge with psyphen & cock : 2 Nos.

Vaccum Gauge : 2 Nos.

Foot valve : 2 No.

Energy meter : 2 Nos.

Switch & Starter : 2 sets.

Stop Watch : 1 No.

Measuring tank : 450 x 450 x 750 size with scale fitting & 2” drain valve

Speed Sensor with indicators : 2 sets

Instruction Mannual : 1 Copy.

ELECTRICAL ANALOGY APPARATUS

The apparatus is in two parts namely :

1. Experimental setup and
2. Analogue field plotter

The experimental set up consists of a transparent tank of 400 - 450 mm area and 75 mm depth.
In this tank the model under study is to be installed.
The model is to be designed as per the requirement out of copper and bakelite plates. A sample model arrangement will be given with the setup.

A probe is mounted on a trolley, which can traverse in two planes fitted on Tray to locate equipotential lines.
X – y co – ordinate of the probe at each be locate on the scale fitted on the cross slide.
Necessary potential can be given with the help of analogue field plotter can be displayed on the meter provided.

PIPE PRESSURE TEST APPARATUS

Specification :

1. Reservoir; Made up of M. S.
Sheet. Size: » 500mm x 500mm x 500mm Ht.

2. Hydraulic pressure pump motorized

3. Manifold to fix various size pipes.

4. Stand with tray made out of thick with fiber lining M. S. Sheet.

5. Safety Guard.

6. Pressure Gauge.

7. Test Specimen Pipe of size;
a) 1/2" Dia : 750mm
b) 1” Dia :: 750mm
c) 1 1/2" Dia : 750mm
d) Upto 12" Dia 1 750mm Optional)

Pressure Measuring Device
The devices incorporated are Single well manometer Differential manometer Sensitive manometer Pressure gauge Vacuum gauge with storage tank monoblock pump & rotameter

Computerised Pelton Wheel Turbine Test Rigs (3.75 K watt) (Closed Circuit system) We are Manufacturer, Supplier, Exporter of Computerised Pelton Wheel Turbine Test Rigs & our setup is situated in Sangli, Maharashtra, India.

Computerised Pelton Wheel Turbine Test Rigs (3.75 K watt)
(Closed Circuit system)

We are Manufacturer, Supplier, Exporter of Computerised Pelton Wheel Turbine Test Rigs & our setup is situated in Sangli, Maharashtra, India.